Reading Rack Bookshelf Woodworking Plan. Reading Rack Bookshelf Woodworking Plan. WOOD®Store Keep your reading materials, whether books or magazines, in order with this convertible case. You can hang one on a wall, set one on a desk, or stack several of them on the base as a beautiful all-in-... 31_MD_00398 31-MD-00398 9.95 WoodworkersWorkshop
Location
Home / Indoor Furniture and Misc / Bookcases Woodworking Plans for Projects / Reading Rack Bookshelf Woodworking Plan.

Reading Rack Bookshelf Woodworking Plan.

31-MD-00398 - Reading Rack Bookshelf Woodworking Plan.
Keep your reading materials, whether books or magazines, in order with this convertible case. You can hang one on a wall, set one on a desk, or stack several of them on the base as a beautiful all-in-one bookcase and magazine rack like this one. The shelves sit flat to display books or angle forward for magazines.

Finished Dimensions
Width: 36 inches (91.4 cm)
Depth: 11.75 inches (29.8 cm)

Plan Author: James Downing

Published Date: 1999

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used walnut, and walnut plywood, but you can use wood of your choice.

Tools needed: Table saw, drill, drill press, pocket hole jig, router and other common workshop tools

Your Total:

31-MD-00398 - Reading Rack Bookshelf Woodworking Plan. Selection

31-MD-00398PAPER - Reading Rack Bookshelf Woodworking Plan. - Paper plan
USD 12.95 | 12 Points | In Stock
31-MD-00398PDF - Reading Rack Bookshelf Woodworking Plan. - PDF plan
USD 9.95 | 9 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Bookshelf Clamp Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap plywood you probably have in your workshop and sell for a buck at craft shows. A basic 1 page instruction on how to make one with full size drawings. Beginner s...

From USD 2.95
1 Point | In Stock
Simple Book Caddy Woodworking Pattern

This is a very simple, but useful project that shows one of our favourite assembly techniques - False Dowel Construction. It resembles the old-fashioned dowel construction, but the thin slice of dowel...

From USD 2.95
1 Point | In Stock
Hen Book Stand Woodcraft Sign Pattern Downloadable

Most plaques may be made into Book Stands by gluing a plaque to each end of a 1/2 or 3/4 inch thick x 5-1/2 inch wide piece of board. The length may be as small as 6 or 8 inches or as long as 24 inche...

From USD 2.95
1 Point | In Stock
Whale Tail Bookshelf Downloadable Woodcrafting Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. Most plaque shapes can be made into slanted book shelfs, just like our whale of a tale book shelf. Beginner skill level...

From USD 2.95
1 Point | In Stock
Boat Shelf Lamp Woodworking Plan

Perfect for both nautical and cabin style decorating. This project has four shelves so you can stow away your own nautical gear. This project can also be built without lamp and used as a wall shelf. The boat itself measures 23 inches high.

USD 10.99
10 Points | In Stock
Boat Shelf Woodworking Plan - medium.

Boat shelf projects are available in three sizes, each sold separately. Projects are made from pine beaded board, 1/4 inch plywood and some 3/4 inch stock. Pattern for oars is included with the large boat plan...

USD 23.95
23 Points | In Stock
Crafters Cabinet Woodworking Plan.

Keep all of your rubber stamps, memory book and other craft supplies in one place. Plans show how to make both the 17 drawer floor cabinet 51 inches tall and the 7 drawer shelf cabinet 23 inches tall. Both cabinets are 15-1/2 inches wide x 12-1/2 inches deep. Build them from pine boards.

USD 17.99
17 Points | In Stock
Adjustable Book Rack Woodworking Plan

This book rack expands and contracts to hold one or more books upright. It'll be made out of 1/4 and 3/4-inch thick stock. The plan features moose, bear, eagle, and fish designs.

USD 14.99
14 Points | In Stock
Book Stack Rack Woodworking Plan.

Keeps your childrens story books, coloring books, CDs or DVDs organized. Each section stacks on top of another. You can make one, two or three sections (pictured) as your collection grows.

USD 13.99
13 Points | In Stock
Boat Shelf Woodworking Plan

Looking for the perfect home accent to match your seafaring tastes? How about our novel boat shelf? Designed by Jim Shotwell, an accomplished boatbuilder and woodworker from Nescopeck, Pennsylvania, ...

From USD 9.95
9 Points | In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
4 Board Table Top Reindeer Scrollsaw Project
Mary Joseph Baby Jesus and Sheep Nativity Yard Art Woodworking Pattern.
Grinch Christmas Gifts in the Bag! Yard Art Woodworking Pattern
Nativity Scene - Angel Yard Art Project
Santa Camo-Claus Kneeling Yard Art Woodworking Plan
Nutcracker 8 ft tall Yard Art Woodworking Pattern
Santa Claus and Rudolph Yard Art Woodworking Pattern
Sasquatch Family Yard Art Woodworking Pattern
Santa Claus with Camouflage Kneeling Yard Art Woodworking Plan
RCMP Memorial Ribbon Yard Art
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2024 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.026952 Seconds Memory Usage: 1.63443 Megabytes
Kryptronic