Bandsaw Table System Plus 3 Jigs Woodworking Plan Bandsaw Table System Plus 3 Jigs Woodworking Plan WOOD®Store Looking to take your bandsaw to a whole new level of performance and versatility? Here is your chance. After you build the table, contruct the jigs included with the plan, and then see our section... 31_MD_00232 31-MD-00232 5.95 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Bandsaw Table System Plus 3 Jigs Woodworking Plan

Bandsaw Table System Plus 3 Jigs Woodworking Plan

31-MD-00232 - Bandsaw Table System Plus 3 Jigs Woodworking Plan
Looking to take your bandsaw to a whole new level of performance and versatility? Here is your chance. After you build the table, construct the jigs included with the plan, and then see our section -Put Your Bandsaw to Work- starting on page 19 for tips on putting the system to work in your shop. The three jigs included are: tapering jig, duplicating jig, and feather board/single-point fence.

Plan Author: Jeff Mertz

Plan Contributors: Marlen Kemmet, Roxanne LeMoine, Lorna Johnson, Owen Duvall

Published Date: 2003

Plan Language: English, all measurements are inches/feet unless stated otherwise.

Wood and/or Supplies needed: We used birch plywood, maple and tempered hardboard, but you can use a wood of your choice.

Tools needed: Table saw, router, jigsaw, bandsaw, hacksaw, and common hand tools.

Your Total:

31-MD-00232 - Bandsaw Table System Plus 3 Jigs Woodworking Plan Selection

31-MD-00232PAPER - Bandsaw Table System Plus 3 Jigs Woodworking Plan - Paper plan
USD 8.95 | 8 Points | In Stock
31-MD-00232PDF - Bandsaw Table System Plus 3 Jigs Woodworking Plan - PDF plan
USD 5.95 | 5 Points | In Stock

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

3D Moose Head Woodworking Pattern

If you have a piece of plywood approximately 24 x 36 inches, you can make this project. Shown here made with 3/8 inch thick plywood. I used the scrollsaw for cutting the outlines and used the bandsaw ...

From USD 2.95
2 Points | In Stock
Hinged Lid Bandsaw Box Downloadable Scrollsaw Woodworking Pattern

Tool around with your bandsaw or scrollsaw and make yourself a simply hinged lid box. Cut it out from scrap wood you probably have in your workshop. Beginner skill level.

From USD 2.95
2 Points | In Stock
Bandsaw Box with Lid Downloadable Scrollsaw Woodworking Pattern

With the smallest of wood pieces you could make this little box to store trinkets or gifts. Cut it out from scrap wood you probably have in your workshop. Beginner skill level.

From USD 2.95
2 Points | In Stock
Calculator Stand Downloadable Scrollsaw Woodworking Pattern

With the smallest of wood pieces you could make this little stand to rest your calculator or phone at just the right angle for viewing at a glance while working at your desk. Cut it out from scrap woo...

From USD 2.95
2 Points | In Stock
2 Drawer Bandsaw Box Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. We are pretty sure once you see just how easy it is to make a band saw box, you will be making more. A basic 1 page ins...

From USD 2.95
1 Point | In Stock
Whatnot Box Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. We are pretty sure once you see just how easy it is to make one of these trinket boxes, you will be making one and then...

From USD 2.95
1 Point | In Stock
Simple Ring Box Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Build from the smallest scrap wood you probably have in your workshop and sell for a couple bucks at craft shows. A basic 1 page instruction on how to make one, with full size drawin...

From USD 2.95
1 Point | In Stock
Bowling Pinman Downloadable Scrollsaw Woodworking Pattern

Sawbuck projects! Build from the smallest scrap wood you probably have in your workshop and sell for a buck unpainted at craft shows. A basic 1 page instruction on how to make one, with full size draw...

From USD 2.95
2 Points | In Stock
Bandsaw Boxes Downloadable Scrollsaw Woodworking Patterns

Sawbucks projects! Using the smallest of scrap wood pieces. Bandsawn boxes are fun to create, are excellent gifts and may be very profitable. This design shows the basic technique for creating these e...

From USD 2.95
1 Point | In Stock
Card Deck Wood Box Downloadable Scrollsaw Woodworking Patterns

Sawbucks projects! Using the smallest of scrap wood pieces. This playing card box can be made to hold one or two decks. Most decks are 2-1/4 inches wide but check your cards before starting. Beginner ...

From USD 2.95
1 Point | In Stock
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
4 Board Table Top Reindeer Scrollsaw Project
Mary Joseph Baby Jesus and Sheep Nativity Yard Art Woodworking Pattern.
Grinch Christmas Gifts in the Bag! Yard Art Woodworking Pattern
Nativity Scene - Angel Yard Art Project
Santa Camo-Claus Kneeling Yard Art Woodworking Plan
Nutcracker 8 ft tall Yard Art Woodworking Pattern
Santa Claus and Rudolph Yard Art Woodworking Pattern
Sasquatch Family Yard Art Woodworking Pattern
Santa Claus with Camouflage Kneeling Yard Art Woodworking Plan
RCMP Memorial Ribbon Yard Art
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2024 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.030088 Seconds Memory Usage: 1.687782 Megabytes
Kryptronic