Tilt Top Router Table Woodworking Plan Tilt Top Router Table Woodworking Plan WOOD®Store An open-and-close shop tool designed with you in mind. Count the features of this fully loaded router table, and you will quickly conclude that you have to have one. For starters, the table flips up f... 31_MD_00064 31-MD-00064 6.48 WoodworkersWorkshop
Location
Home / Workbenches & Jigs / Tilt Top Router Table Woodworking Plan

Tilt Top Router Table Woodworking Plan

31-MD-00064 - Tilt Top Router Table Woodworking Plan
50% OFF Special Offer
An open-and-close shop tool designed with you in mind. Count the features of this fully loaded router table, and you will quickly conclude that you have to have one. For starters, the table flips up for easy changing of bits and checking bit height. It is topped by an accurate, easy-to-build fence. A sealed compartment underneath, fitted with a vacuum port, takes care of sawdust. Below that, you will find a slide-out shelf for storing all kinds of bits and accessories. Plus, we offer an optional table design for use with an aftermarket fence.

Finished Dimensions
Height: 35 inches (87.5 cm)
Depth: 19 inches (47.5 cm)

Wood and Supplies needed:
We used MDF, maple or birch, but you can use a wood of your choice. A full materials and supplies list is included with the plan.

Tools needed:
Table saw, drill, clamps, router, and common hand tools.

Item Number:
31-MD-00064PAPER
Your Price:
USD 12.95 USD 6.48 (Save 50%)
Reward Points:
12 Worth USD 0.60
Stock Info:
3 In Stock
Your Total:
Quantity:

Tracing Paper Options

05-TRACEPAPER-1 - Tracing Paper 19x51inch, 1 sheet
USD 3.95 | In Stock
05-TRACEPAPER-5 - Tracing Paper 19x51inch, 5 sheets
USD 7.95 | In Stock
About
Copyright Statement

You Might Also Like...

Router Table Woodworking Plan.

This low cost, easy to build router table has all the best features including universal router insert, fully positionable fence, clear view safe guard areas for both controlled and free hand routing, a mitre slot gauge, router bit holder and vacuum hose connection.

USD 21.99
21 Points | In Stock
Push Sticks Woodworking Plan.

Make your own safety push sticks, push blocks, and feather boards. Push sticks help keep your fingers away from the table saw blade. Also useful for the jointer, shaper and router table.

USD 14.99
14 Points | In Stock
Router Bit Storage Cabinet Woodworking Plan

Using inexpensive MDF, hardboard and pine material, you can create a cabinet that offers great storage for router bits, bushings, wrenches, safety gear and anything else you use with your router. The ...

USD 9.99 USD 5.00 (Save 50%)
9 Points | 3 In Stock
Lift Up Router and Benchtop Tool Table Woodworking Plan Part 2.

We showed you how to make the end cabinets and the sturdy laminated top for the workbench, in Part 1, the Full-Service Workbench, 31-MD-00058 sold separately. Now, with the basics out of the way, lets...

From USD 9.95
9 Points | In Stock
Tilt Top Router Table Woodworking Plan

An open-and-close shop tool designed with you in mind. Count the features of this fully loaded router table, and you will quickly conclude that you have to have one. For starters, the table flips up f...

USD 12.95 USD 6.48 (Save 50%)
12 Points | 3 In Stock
Benchtop Router Table Woodworking Plan

This project is a must in your shop and you can put it together in a weekend for less than $100 plus the cost of your own wood. Its fence adjusts in a flash and locks into T-slotted mini-tracks with t...

USD 12.95 USD 6.48 (Save 50%)
12 Points | 1 In Stock
Dovetail Jig Stabilizing Fence Woodworking Plan

Most jigs rely on a small cam to position the board, but do not provide enough support along the length of the board to prevent racking. Without proper alignment, the dovetails vary slightly in length...

5 Points | 4 In Stock
Pocket Hole Routing Jig Woodworking Plan

A simple, no non-sense design. Given how specialized the tools are for pocket-hole joinery, some woodworkers have balked at using the technique for projects. Nowadays, the dedicated jigs for drilling ...

5 Points | 4 In Stock
Right On Dadoe Jig Woodworking Plan.

Do not grieve over sloppy router-cut dadoes. Instead, gear up for accuracy with this easy-to-make-and-use scrap wood problem solver.

From USD 5.95
5 Points | In Stock
Fail Safe Router Jig Woodworking Plan

This router jig is a specialist at through or stopped dadoes and grooves. Included is an exploded diagram.

5 Points | 6 In Stock
Get discounted pricing on Special Offer items when you buy today.
Denotes exclusion from all discount offers. Discount codes are not applicable on excluded items.
Free Plans and Resources

We have been compiling the most comprehensive directory of internet woodworking information since 1998.

Our daily updates include new pre-approved, hand-selected DIY project resources. We do a lot of effort to ensure that our database only includes safe, correct woodworking designs for hobby crafters and woodworkers.

Visit Resources & Free Plans

Banner Adverts
4 Board Table Top Reindeer Scrollsaw Project
Mary Joseph Baby Jesus and Sheep Nativity Yard Art Woodworking Pattern.
Grinch Christmas Gifts in the Bag! Yard Art Woodworking Pattern
Nativity Scene - Angel Yard Art Project
Santa Camo-Claus Kneeling Yard Art Woodworking Plan
Nutcracker 8 ft tall Yard Art Woodworking Pattern
Santa Claus and Rudolph Yard Art Woodworking Pattern
Sasquatch Family Yard Art Woodworking Pattern
Santa Claus with Camouflage Kneeling Yard Art Woodworking Plan
RCMP Memorial Ribbon Yard Art
Your Free Woodworking Plans and Projects Search Engine Since 1998
Your Account
WoodworkersWorkshop
Your Cart
Your Cart: Empty
Search
© 1998-2024 WoodworkersWorkshop, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.0273 Seconds Memory Usage: 1.591286 Megabytes
Kryptronic