|
Total woodworking resources in this category: 27. Displaying Page 1.
 |
Chisel and Tool Handles (PDF)
Nothing feels so good as a well designed handle, especially made to fit each individuals needs. An excellent project for customising your workshop! Anna Grakivac, NorthShore, Auckland,NZ.
|
| Link Type: free plans | Link Source: Teknatool | Fix Link? |
|
 |
Compressioon Chuck
With its tapered inner walls and expansion slots, this shop-made compression chuck will hold round pieces for finish-turning or drilling.
|
| Link Type: free plans | Link Source: American Woodworker | Fix Link? |
|
 |
Jig - Miter Sled, AcuMiter ft
With this plan you can make yourself a truly accurate miter sled so you can cut first class segments for your rings that you do not have to spend time touching up to get a perfect ring. A notable feature of this sled is that adding a new miter angle to your repertoire is quick and cheap!
|
| Link Type: free plans | Link Source: Segmented Turning | Fix Link? |
|
 |
Jig, Ball Cutting
My final design actually gave me the potential to Turn a Ball of 180mm diameter [7 inches] and I could have added another layer of the 20mm MDF to the base and still had the capability for a 160mm diameter Ball [+6 inches], of course if your requirement is for a larger capacity then you will need to adjust the dimensions accordingly.
|
| Link Type: free plans | Link Source: Laymar-Crafts | Fix Link? |
|
 |
Jig, Bottle Stopper
This is my solution to turning bottle stoppers. It originally appeared as an article in More Woodturning a couple years ago...
|
| Link Type: free plans | Link Source: Kevin Miller | Fix Link? |
|
 |
Jig, Centering Device
...there may be others who are not aware of this easily made and very useful tool.
|
| Link Type: free plans | Link Source: Lee Valley | Fix Link? |
|
 |
Jig, Faceplate Cutoff Fixture
I turn almost all of my turnings glued to a faceplate. I usually part the turnings off the faceplate but I wanted to share a fixture that my friend Sonnie Sharrar uses to cut the faceplates off his bowls. The fixture in the photos is a bit different than Sonnie’, but I tend to turn larger bowls and this fixture can handle them.
|
| Link Type: free plans | Link Source: Turned Wood | Fix Link? |
|
 |
Jig, Parallax (PDF)
After rejecting a couple of ideas about how to project a pattern onto the work while turning, I came up with this idea - make a jig to hold two copies if the plans, one cut along the finished contours and the other uncut, so that you can use the parallax effect to line up your eye correctly with the plans.
|
| Link Type: free plans | Link Source: Delorie | Fix Link? |
|
 |
Jig, Round Chuck - from wood
Tighteners from wood, shown here, which cover the workpiece practically at the whole end, are very helpful, hold and thus reliably and above all without trace inches. (Germany)
|
| Link Type: free plans | Link Source: Wood-Line | Fix Link? |
|
More Information on these Pages:1
2
next last
|
Newest Woodworking Products
Woodworking Projects for Women Book
This new book written by Linda Hendry, one of Americas most accomplished woodworkers, will guide other women, step-by-step, through 16 projects proving that workshops and power tools are not just for ..
Understanding Wood Finishing Completely - The Family Handyman Series Book
For more than 18 years, Bob Flexner has been inspiring woodworkers with his writings and teachings on wood finishing. Now, from this best-selling author comes the long-awaited and completely updated second edition of UNDERSTANDING WOOD FINISHING.
Workshop Projects - Best of Woodworkers Journal Book
Want the hardest-working shop on the block? The secret lies in streamlining the woodworking process by maximizing your space and organizing your work area. Now, Workshop Projects, Fixtures & Tools for...
Setting Up Shop - Completely Revised and Updated Book
This must-have guide for novices and advanced woodworkers alike provides a systematic approach to planning your shop while accounting for budget, skill level and future needs. Includes new photos and ...
Victorian
Barbie Doll House
Announcing the most stunning project any woodworker could undertake for their children or grandchildren.
|
RSS
