|
Total woodworking resources in this category: 167. Displaying Page 1.
|
Awl, Turn a Scratch (PDF) Select a piece of wood at least 1-1/2 inches - 2 inches square. The grain should run lengthwise down the blank, or the wood may break. Cut the wood blank to 2-3/4 inches, the length of the brass tube in the awl kit. Using the 7mm bit, drill a centered hole lengthwise through...
|
Link Type: free plans | Wood Source: Highland Woodworking | Fix Link? |
|
|
Beam Compass I needed to lay out some large circles for a project recently. And knowing how important accuracy is, I built a beam compass to meet my needs. This compass is simple, easy to use, and changing circle sizes is as easy as simple sliding a dowel.
|
Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Beam Compass PDF Build your own beam compass jig for marking out circles using this free downloadable woodworking plan. There is also a video at the link.
|
Link Type: free plans | Wood Source: WoodworkingForMereMortals | Fix Link? |
|
|
Beam Scribe Marking Tool This Beam Scribe is a great little addition to you tool kit and it also makes a nice gift for that woodworker in your family.
|
Link Type: free plans | Wood Source: RunnerDuck | Fix Link? |
|
|
Bench Dogs When clamping a workpiece in my workbench vise with bench dogs, I find that the small, metal dogs can leave marks on the edges of the piece that are tough to sand out.
|
Link Type: free plans | Wood Source: Woodworking Tips | Fix Link? |
|
|
Bench Top Spray Booth In this article, I will show you a collapsible benchtop booth based on a simple box fan. A well-designed spray booth will capture the over-spray and direct it out of the building, away from you and your work.
|
Link Type: free plans | Wood Source: American Woodworker | Fix Link? |
|
|
Benchtop Tool Stand The stand built here is sized for a benchtop planer. It also works well for a benchtop drill press or jointer.
|
Link Type: free plans | Wood Source: Extreme How To | Fix Link? |
|
|
Bow Saw This is a link to a Google 3D SketchUp drawing for a bow saw. It excels at cutting curves; the blade allows for long strokes that cut much faster and more evenly than a coping saw. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.
|
Link Type: free plans | Wood Source: Google 3D | Fix Link? |
|
|
Bow Saw (ZIP) A miniature bow saw designed to work with a coping saw blade. Two drawings and a text file. DXF format. Plan is featured at CAD Files for Woodworkers. Created by Tom Lewis.
|
Link Type: free plans | Wood Source: WoodworkersWorkshop CAD Files | Fix Link? |
|
|
Box, Tracing This easy-to-build tracing box is a bright idea for your shop drawings.
|
Link Type: free plans | Wood Source: CanadianHomeWorkshop | Fix Link? |
|
|
Broom Build your own workshop broom by following along at the link. There is a video to help guide you through the process.
|
Link Type: free plans | Wood Source: IBuildIt | Fix Link? |
|
|
Build a Custom Tool Wall Use any or all of the free projects at the link to get your workshop organized. Build a custom tool wall... it will save you time searching for the correct tool.
|
Link Type: free plans | Wood Source: Instructables | Fix Link? |
|
|
Cabinet Scraper I had a lot of trouble finding any local stores that carried wood working supplies. One of the things I wanted but no one even knew what I was talking about when I asked, was a cabinet scraper. So I spent some time online and found that you can get them from online woodworking stores, but I am also very impatient.
|
Link Type: free plans | Wood Source: Steve Slaven | Fix Link? |
|
|
Cabinet, Flammables Have you got finishing supplies scattered all over your shop? Concerned that they are a fire hazard? Organize them into this cabinet built out of one sheet of plywood and you will sleep better at night.
|
Link Type: free plans | Wood Source: PopularWoodworking | Fix Link? |
|
|
Cabinet, Miter Saw (ZIP) A Miter Saw Cabinet with folding wings. Folds down to 36" width. Lots of storage space in front drawers. DXF Format. This free woodworking plans and woodworkers projects information is courtesy of the CAD Files for Woodworkers web site.
|
Link Type: free plans | Wood Source: WoodworkersWorkshop CAD Files | Fix Link? |
|
|
Cabinet, Shop (ZIP) Base cabinets for the shop or garage. DXF Format This free woodworking plans and woodworkers projects information is courtesy of the CAD Files for Woodworkers web site.
|
Link Type: free plans | Wood Source: WoodworkersWorkshop CAD Files | Fix Link? |
|
|
Cart, Air Compressor I use a small portable air compressor in my shop. But despite the name, I find it cumbersome to carry this compressor around where I need it. So instead, I built a small, roll-around cart for the compressor.
|
Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Cleanup Center for your workshop (PDF) I have built a lot of storage cabinets for my tools and hardware, so I always know right where to find them. Unfortunately, that was not the case for my cleaning supplies. To solve this problem I built the heavy-duty cleanup center you see above. The cutting diagrams and materials list are available to download in this Online Extra.
|
Link Type: free plans | Wood Source: ShopNotes | Fix Link? |
|
More Woodworking Information on these Workshop Pages:1
2
3
4
5
6
7
8
9
next last
Our Online Store New Plans & Updated Products
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| |