A good collection of lathe tuning projects on how to make all types of wooden bowls. These free woodworking plans are hosted by a variety of woodworking web sites.
Nut Bowl This nut bowl was turned in three separate segments, then glued and doweled together. Beautiful.... LeesWoodProjects (free plans)
Wing Bowls To make these bowls, in addition to the turning tools, you will also need an angle grinder and a carver.... WoodworkersInstitute (free plans)
Total woodworking resources in this category: 30. Displaying Page 2.
Bowl, Turning a Simple I call this turning a simple bowl because I am not using any special tools just bowl gouges and spindle gouges. The shape is a simple one also. I know that when you first start turning bowls trying to get the surface cut cleanly on the end grain areas can present a problem. Reversing the bowl to finish the bottom can also present a challenge. I hope that this tutorial will help answer a few questions on turning a cross grain oriented bowl.
Bowls, Carving Large These bowls are patterned after a traditional Scandinavian design and are sometimes called dough troughs. I make my bowls straight from the tree buy splitting a log and hollowing each half.
Link Type: free plans | Wood Source: American Woodworker | Fix Link?
Bowls, Routed This online video from Woodsmith issue 170, we show how to shape beautiful bowls with a router. The secret is a collet extension that allows the bit to reach the bottom of the blank.