Workshop Featherboards

This is a link to a Google 3D SketchUp drawing for simple jig to use with clamps to make feather boards. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

From Bill Pound - This page will be dedicated to notes and tips from my woodworking shop. These things I find interesting and I hope you find them useful or interesting as well.

Springy fingers, eh? Interestingly enough, the amount of flexibility in a feather board is inversely proportional to its effectiveness; the springier the fingers, the less likely they will control your stock when you really need them to. After all,...

Follow along and make your own wide sliding featherboard. Lots of shop pics to help you.

Guarantee perfect rip cuts with this quick-to-set tablesaw helper.

Featherboards are simple jigs that enhance both safety and accuracy. Also called fingerboards, they will hold narrow or thin stock securely against a tool fence or table without jeopardizing your fingers.

A featherboard makes working with smaller stock on your table saw or router table much safer and simpler. These free woodworking plans will show you how to create your own featherboards.

With this adjustable miter-slot featherboard, a twist of the wrist is all it takes to hold your work in place. This featherboard has a pointed end, which allows me to switch from the tablesaw to the bandsaw without having to disassemble the gadget.