Scrollsaw - Fishing woodworking plans/projects

This circular stand can accommodate eight rods. Two oars, which you may cut from 3/4-inch-thick boards, constitute the project's centre. The foot and top ornamentation are painted in red and white to resemble bobbers. This woodworking design includes instructions, exploded view diagrams,and full-size drawings for the projects. The project is 51 inches tall approximately.

On one side of these projects it says Welcome, while on the other it says Gone Fishin. You may just construct a fish and flip it over, or you can hang the plaque from the fish and do the same. This woodworking design includes instructions, exploded view diagrams, and full-size drawings for the projects.

What is a cuter location than this adorable tiny cottage to store dolls and their accessories? Made primarily of plywood that is 1/2 inch thick. The pattern pieces are drawn at full scale. It is 14 inches deep, 23-1/2 inches long, and 18-1/2 inches high.

Designed to stand alone on the floor or to be mounted on a wall. It has room for seven fishing rods and a drop-down drawer at the bottom. The project plan includes instructions for making your own fish drawer handles and fish decorations. Measures 49 inches tall by 26 inches wide by 6 inches deep.

These giant fishing lures will get your friends laughing. Easy to make from 1/4 inch thick plywood and 3/4 inch thick pine. This plan includes FULL SIZE drawings to make both the catfish lure and the dogfish lure. Projects mount on a 10-1/2 inch high x 16 inch long plaque.

This whimsical predator can lurk on your backyard fence - or mount it indoors as a trophy fish! Make from inexpensive cedar fencing and some painted plywood, this project is easy to build and a fun addition to your outdoor or indoor decorating. All patterns drawn FULL size.

This nautical fretwork scroll saw woodworking pattern features one of natures wonders, the seahorse. This pattern is very delicate and must be cut and handled very carefully. A spiral blade will minimize turning the project and small detail lines are much easier to cut. Cut small details last to minimize vibration. Intermediate skill level.

This aquatic fretwork scroll saw woodworking pattern features the wonderful lion fish. This pattern is very delicate and must be cut and handled very carefully. A spiral blade will minimize turning the project and small detail lines are much easier to cut. Cut small details last to minimize vibration. Intermediate skill level.

This aquatic fretwork scroll saw woodworking pattern features the funny looking clown fish. This pattern is very delicate and must be cut and handled very carefully. A spiral blade will minimize turning the project and small detail lines are much easier to cut. Cut small details last to minimize vibration. Intermediate skill level.

Know a fisherman with everything? Your favorite fisherman will be captured ... hook, line and sinker... when they see this project built for them. You will leave them reeling with appreciation! This wall mounted fishing rod rack has room for 6 rods, peg hooks for handing gearing and a small shelf for the tackle box. Height will vary, based on length of fishing rods. Scrollsaw pattern of the fish/trees overlay is included.

This fishing fretwork scroll saw design is of a tarpon jumping out of the water. This pattern is very delicate and must be cut and handled very carefully. A spiral blade will minimize turning the project and small detail lines are much easier to cut. Cut small details last to minimize vibration. Intermediate skill level.

This fishermans fretwork scroll saw design is of a bass jumping out of the water. This pattern is very delicate and must be cut and handled very carefully. A spiral blade will minimize turning the project and small detail lines are much easier to cut. Cut small details last to minimize vibration. Intermediate skill level.

This fishermans fretwork scroll saw design is of a rainbow trout jumping out of the water. This pattern is very delicate and must be cut and handled very carefully. A spiral blade will minimize turning the project and small detail lines are much easier to cut. Cut small details last to minimize vibration. Intermediate skill level.

This bear is proud to display his catch of the day - a fishing rod holder like no other! Everyone who sees it will love it. Holds up to 10 rods. Make it from 3/4 inch and 1-1/2 inch stock. Pattern drawn...